fa203301930
moje treści
Wszystkie wiadomości
Opinie
Komentarze
odpowiedzi
pytania

Wszystkie wiadomości

fa203301930 26/04/2020
I think this is a really nice plane, it was easy to build and flies really well. I'm not sure if the kit version is worth the full price, but buying it on sale and already having all the electronics made it a pretty good deal for me. Bad things: I don't think my model got printed correctly, it seems a bit red, but I choose to believe that it has character and it still looks pretty good in the air. It also had a few minor cutting errors, mostly with the locations of the control horn slots, but those were easy to fix. Good things: It was very easy to build. Andrew Newton has a build video on youtube which is very easy to follow. Only small modifications were needed to fix some small cutting errors, but nothing was missing. It flies great, even in a relatively small area. So far I've only flown it at a baseball field and that was very manageable. Nose in crashes will usually break off the firewall, but it's EPP and plywood so it's very easy to fix.
Dancing Wings Hobby DW E19 Eagle V2 1430mm Rozpiętość skrzydeł EPP DIY Samolot RC o stałym skrzydle KIT/PNP Wolno Latający Szkoleniowiec dla początkujących
US$73.49 US$193.59
9
Zalecenia
Komentarze (0)
fa203301930 11/07/2020
So far I like this iron handle a little more than the one that came with my T12 station. I'll start by talking about some issues I had with it. When this handle arrived, the connector's strain relief was not connected at all. The two screws were loose in the bag, so you might want to watch out for that. All of the handle components were also loose, so those may need to be tightened up. I also find that this handle sometimes gets pretty hot. Considering the standby feature, this probably wouldn't normally be a big deal, but the standby switch is VERY sensitive, so even bumping the table will bring the iron out of standby mode. All of that being said, you can see in the picture that the distance from the grip to the iron tip is less than half of the distance for the standard handle. I think this is much more comfortable to use, so for the price I think it's definitely worthwhile
KSGER 9501 Uchwyt lutowniczy T12 ABS DIY Pen dla stacji lutowniczej STM32 OLED Ołówka do spawania końcówka silikonowa
US$18.47 US$19.99
8
Zalecenia
Komentarze (0)
fa203301930 11/07/2020
I bought two orders of these, so 12 servos total, and what I learned is that these are not especially consistent. I got three types of servos. One servo had all metal gears, five had one metal gear, and six had one plastic gear. I think these are pretty decent, especially for the price, but be aware that you won't really know exactly what you're getting. Another problem that many cheap servos have (including these) is that they don't center accurately. Approaching center from one side vs the other will always be a few degrees off. The pictures attached show the three different types of servos I got.
6 sztuk serwomechanizmów MG90S RC Micro o wadze 13,4 g do modeli samolotów ZOHD Volantex, helikopterów RC, łodzi i samochodów
US$20.69 US$23.99
1
Zalecenia
Komentarze (1)
fa203301930 13/07/2020
These are ok. They wet out pretty well, not great. They also aren't as fine as I would like and the conical tip is a really large angle. That said, they're quite alright to just replace the blade tip that came with my iron.
KSGER 4szt T12-K T12-B T12-BC2 T12-D24 Groty lutownicze Seria T12 do stacji lutowniczej ReWork
US$20.78 US$21.99
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
It's...an Ender 3. It works great. None of my parts had any errors. Take some time to square everything up and tune everything from the start, it'll save a lot of trouble in the end.
Drukarka 3D Creality 3D® Ender-3 o rozmiarze druku 220x220x250 mm z funkcją wznowienia zasilania
US$289.00 US$499.00
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These are excellent. Having a boatload of servo extensions lying around is extremely handy, so I really love having these. The only thing I would say is that they are noticeably thicker than most servo leads I've encountered, which looks and feels a little strange. I would also recommend flat servo extensions for things like aileron servos, but I do like the look of these twisted cables for other applications.
10szt. 22AWG 60-przewodowy kabel przedłużacza serwa Futaba JR przeciwzakłóceniowy
US$10.34 US$9.99
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
This works just fine for me. I wish I could test it, but I don't have any equipment for that.
Przejściówka SMA Meski na RP-SMA Zeński RF Koakialny Konwerter
US$5.99 US$7.99
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These are cheap, pretty good quality for the price, and a great propeller to keep around for planes with bigger, low-KV motors.
10 szt. Śmigła Gemfan 9050 ABS z napędem bezpośrednim koloru pomarańczowego do samolotu RC
US$6.99 US$20.79
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These are super cheap, decent quality for the price, and a great propeller to keep around for small park flyers. Some of mine arrived slightly bent, but they cost so little I find it hard to care that much as long as they're still usable.
10 sztuk śmigła Gemfan 5030 ABS Direct Drive Orange do samolotu RC
US$6.50 US$18.39
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These are nice to keep around, although I would recommend getting some that poke through the foam of an airplane instead. These have holes and backplates, but no pins or screws to connect them. I don't typically have any screws this small sitting around, and that seems like overkill for simple foamies. A good product, but not one that I find especially useful.
10 szt. Uniwersalny trójkątny róg steru sterowego do zestawu części zamiennych do samolotów RC
US$13.85 US$14.39
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These are actually nylon and feel excellent. No molding issues, and they fit together nicely. Not as cheap as some other connectors, but useful to have around and they feel premium.
Złącza wtykowe Amass XT60 Bullet do baterii RC Motor Black 10 par
US$16.09 US$16.99
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
I've printed with about half a roll of the white PLA because it was easy to get, which isn't exactly the case everywhere right now. So far it's printed really well, although it's not really noticeably better than some cheaper rolls I've used.
Creality 3D® Biały/Czarny/Żółty/Niebieski/Czerwony 1KG 1.75mm Filament PLA do drukarki 3D
US$41.39 US$40.99
0
Zalecenia
Komentarze (0)
fa203301930 13/07/2020
These seem pretty great. No issues with flashing or burrs and all of the pins seem to be milled correctly
10 par złączek interfejsu wtyczki XT30 2 mm Golden Male Female
US$13.85 US$14.99
0
Zalecenia
Komentarze (0)
fa203301930 29/06/2020
These are perfectly serviceable tweezers. They aren't great, the tips aren't ground particularly well, and there's a tiny bit of the black coating extending down to the tips, but it isn't enough to really affect their functionality. Excellent value for the price, especially since tweezers are the kind of thing that I always want to have around.
ESD 10-15 Bezpieczna pęseta antystatyczna Konserwacja Naprawa Szczypce Szczypce
US$6.92 US$7.99
0
Zalecenia
Komentarze (0)
fa203301930 04/04/2020
I really like this iron so far. It's much more customizable than other irons at the same price point and it heats up much faster than the cheap irons with T18-style tips. I wish that it shipped with the older handle style, because this one places the tip really far away from your hand, even further than my T18 iron. That's a pretty easy upgrade, though, so I'd recommend going ahead and purchasing a new handle if this seems like something that would bother you.
Stacja lutownicza cyfrowego kontrolera temperatury V2.1S T12 Zestaw lutowniczy Elektryczne końcówki lutownicze T12-K + Uchwyt 907
US$49.99 US$76.99
1
Zalecenia
Komentarze (0)
fa203301930 08/04/2020
I mean, it's a stand that works. It's pretty lightweight and there's nothing to keep it in place so it slides around a lot, that's pretty annoying, but it wouldn't be too hard to add some rubber feet or just make a whole new base to mount the spring to.
Wielofunkcyjna stacja wsporcza do lutownicy z metalową podstawą
US$10.38 US$10.99
0
Zalecenia
Komentarze (0)
48V 1000W Elektryczny bezszczotkowy sterownik silnika prędkości do roweru elektrycznego i skutera
US$64.67 US$67.99

Q: used to connect with 1000w motor, 48v 2-wire, red and black ... does it work?

zapytał freire na 2019-04-12 10:25:43

fa203301930 No, this controller is for brushless motors. Motors with two wires are brushed motors, so you'll want to look for a brushed motor controller

2019-07-12 01:45:36 Pomocny (1)
Zatwierdź
odpowiedzi (3)

Jesteś ekspertem, czy możesz pomóc?

Serdecznie zapraszamy do zasubskrybowania e-maila z zaproszeniem!

Jeśli się zapiszesz, zaprosimy Cię e-mailem, aby odpowiedzieć na pytania ludzi dotyczące produktów. Subskrybując Ciebie], zdobędziesz także "Pomocną odznakę "! Możesz zrezygnować z subskrypcji w dowolnym momencie na stronie ustawień prywatności.

Pomóż innym i bądź szczęśliwszy!

  • Subskrybuj

O odznakach

Odznaki są powiązane ze społecznością, a użytkownicy zdobywają odznaki, tworząc wysokiej jakości treści, wykonując misje lub uczestnicząc w specjalnych działaniach. Określeni ludzie również będą mieli własną wyłączną odznakę.
Odznaka CEO

Odznaka CEO jest własnością tylko szefa Banggood.

Wkrótce otrzymasz odznaki, które możesz zdobyć
  • ok

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • ok

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe