Wszystkie wiadomości

julien.morris.personal I would doubt that - I use it to cut 3.6 mm ply - thats at 3mm per second at .5 and 1 mm depth.

2019-06-20 11:17:45 Pomocny (1)
Zatwierdź
odpowiedzi (1)

julien.morris.personal Yes- it will cut 3.6mm ply - slowly ! You'll need two passed at 3mm per second feed rate, first cut a .5mm, second at 1mm. I've done lots of that. You'll need to ensure the ply is flat, it's not very forgiving - I assume that's because the focal length is small.

2019-06-19 01:47:00 Pomocny (0)
Zatwierdź
odpowiedzi (1)