Najlepsze oferty na Części do samochodów RC,Racerstar 2435 Motor Brushless Wodoodporny

BG171311151 26/09/2020

Dropped this in my Traxxas Summit with a 20t pinion. Been running 4s (2x 2s Maxamps 6500mah 150c). I did 5 back to back speed runs with some heavy braking at the end of the runs(front flips at 100% force) and raced around a parking lot for maybe 10min. Esc was almost cool to the touch, very impressed, motor was a little warm to the touch. Confident I could run 6s, probably all day on the esc. I do recommend you get the programming card, brake force is weak at the default setting.

Racerstar 4068 Bezszczotkowy Wodoodporny Silnik Bezczujnikowy 2050KV 120A ESC Do Samochodów RC Skala 1/8 Części Samochodowe

93,76€ 97,78€

6

Komentarze (4)

BG171311151 01/10/2021

Put this in a Team Associated RC18T. Rips on 2s with a 30A hobbywing esc. Temps stayed in check on the stock gearing. Have another in a WPL D12 with a drift setup. Both are the 4500kv version. Very pleased with this little motor.

Ramiona zawieszenia przedniego i tylnego Wltoys 144001 124018 124019 EAT14 1/14 4WD Wysokich Prędkości Modeli Samochodów Wyścigowych Części Do Samochodów RC

7,45€ 8,29€

0

Komentarze (0)

BG171311151 01/10/2021

Put this in a Team Associated RC18T. Rips on 2s with a 30A hobbywing esc. Temps stayed in check on the stock gearing. Have another in a WPL d12 in a drift setup. Both are the 4500kv version. Very pleased with this little motor.

Racerstar 2435 Silnik Bezszczotkowy Wodoodporny Bezczujnikowy 6100/4800/4500KV 2.0mm Wał Część Do Samochodu RC

20,29€ 24,90€

0

Komentarze (0)

Wltoys 144001 1/14 2.4G 4WD Samochód wyścigowy RC o wysokiej prędkości Model pojazdu 60km/h

103,32€ 140,22€

Q: if I want to change the esc, transmitter, reciever what should I do? I don't want to change the motor and servo.pls provide the name and model no of the product thanks if there is no specific product pls explain what type of transmitter, receiver and esc should I use. Thank you

zapytał Vignesh_R na 2021-09-29 10:13:11

BG171311151 The esc and reciever is a 2 in 1 unit in this car. If you want to change them, you will need to change the servo too as it's a 5 wire servo and the new reciever will require the standard 3 wire type. I run a a DumboRC x6 reciever and transmitter in mine with a jx 1181mg servo. I'm also running a racerstar 80a esc motor combo.

2021-10-01 02:24:18 Pomocny

Zatwierdź

odpowiedzi (3)