Wszystkie wiadomości

OPELFRIK wires are insulated. you must sand off clear lack insulation or burned down with lighter.

2023-07-25 02:37:46 Pomocny (0)
Zatwierdź
odpowiedzi (1)

BG564854524 Only to be used on the specified FMS planes.

2022-11-23 08:56:16 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Q: is the FC 5A or 12A?

zapytał MarkMontreal na 2022-03-28 08:49:39

OPELFRIK it is 5A per motor

2022-03-29 07:54:37 Pomocny (1)
Zatwierdź
odpowiedzi (2)

Q: can i use this stack for 3inch cinewoop.??

zapytał BG514475419 na 2022-02-01 11:02:18

OPELFRIK this stack is for 5" inch freestyle. For 3" you search MINI Stack around 30-40A 20x20 mm mounting patern.

2022-02-02 03:49:58 Pomocny (1)
Zatwierdź
odpowiedzi (4)

Q: Does this board support 3.3V solder pad ?

zapytał OPELFRIK na 2020-03-05 02:51:39

RodJosol Confirm, no 3.3V pad.

2021-04-28 07:59:16 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Q: Hi, Q: can you use this VTX with the Eachine UZ65 quad? Thanks!

zapytał BG143216164 na 2021-03-01 02:19:12

OPELFRIK HELLO, yes you can ... with some soldering skills

2021-03-02 04:14:40 Pomocny (1)
Zatwierdź
odpowiedzi (1)

Q: can someone confirm if the V2 receiver Works on 3,3V ?

zapytał OPELFRIK na 2020-01-13 04:44:05

BG484864850 Yes it works on 3,3v . Tested on tinyhawk2

2021-02-15 04:12:00 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Q: The esc and the motor admit 4s batteries?

zapytał Quino na 2019-06-22 04:52:27

OPELFRIK Yes,I fly with 3300 4S lipo at full throttle is around 30A

2020-12-22 09:39:11 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Q: What does it use for Analog or Digtital

zapytał BG594982516 na 2020-12-21 10:13:25

OPELFRIK It have Analouge FPV output and 4K recording in mp4.

2020-12-22 03:33:56 Pomocny (0)
Zatwierdź
odpowiedzi (1)