Najlepsze oferty na Moduł TX - Banggood Poland Zakupy online

DuMOHsmol

moje treści: Wszystkie wiadomości; Opinie; Komentarze; odpowiedzi; pytania

Wszystkie wiadomości

DuMOHsmol 26/02/2018

Well, the camera works, but actually isn't a CCD camera at all! And even more, the picture quality is worse than on cheaper and lighter micro cams! The stock lens has a narrow angle, the colors are washed out, and the picture is full of oversharping artifacts. Take a look my comparison with Kingkong mini camera. The Eachine is clearly inferior here, and the picture is even worse in movement because of oversharping. Do not recommend!

Eachine 1000TVL 1/3 CCD 110 stopni obiektyw 2,8 mm szerokie napięcie 5-20 V Miniaturowa kamera FPV NTSC PAL przełączalna

US$10.05 US$22.79

8

Komentarze (1)

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 W 1 Moduł Multiprotokolowy TX dla Frsky X-lite

US$45.99 US$63.99

Q: Is it compatible with BetaFPV LiteRadio 3 Pro?

zapytał DuMOHsmol na 2022-09-11 10:22:15

Mauro yesit is copatible

2022-09-21 02:38:47 Pomocny (1)

Zatwierdź

odpowiedzi (1)

DuMOHsmol 26/02/2018

These are the most aggressive 3mm props for 11xx motors that I could find. They work great with 2S-3S battery and 1106-6000KV motor.

2 pary Gemfan 3035 3X3.5 BN śmigło trzyłopatowe PC z otworem montażowym o średnicy 1,5 mm dla silników 1104 1105 dronów RC FPV Racing

US$8.07 US$8.99

1

Komentarze (0)

DuMOHsmol 26/02/2018

Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.

KINGKONG / LDARC 130GT 130mm z włókna węglowego FPV Racing Frame w / 5V 12V PDB dla RC Drone

US$11.11 US$14.24

4

Komentarze (2)

DuMOHsmol 12/10/2018

The bundled screws were too long. They damaged the windings and three of four motors have stopped working. I did not expect that the screws lying in the same bag with motors would need shortening! A complete disappointment!

4X 1102 11500KV 1-2S Silnik bezszczotkowy i 4 pary Śmigło 1535 dla RC Drone FPV Racing

US$19.99 US$40.35

0

Komentarze (2)

DuMOHsmol 12/10/2018

I was pleasantly surprised to find that it has mounting holes for both 16x16 and 20x20 FCs.

Happymodel Toad90 90mm Micro 3K Carbon Fiber FPV Racing Frame Kit z CNC Aluminium Camera Mount dla RC Drone

US$14.26 US$21.38

1

Komentarze (0)

DuMOHsmol 12/10/2018

Bought them for 90mm quad, but did not have chance to test because of broken motors.

4 Pary śmigieł Gemfan Hulkie 2040 2.0X4.0 PC 3-łopatowe CW CCW dla silników 0806-1105 RC FPV Wyścigowe drony

US$4.19 US$9.99

0

Komentarze (0)

DuMOHsmol Ooop, I guess I'm really late. My setup is:Frame: Kingkong 130GTMotors: D1106 6000KVESCs: Racerstar RS11APropellers: Gemfan 3035 3X3.5 BN 3-bladeBattery: ZOP Power 7.4V 850mah 70C 2SFlight controller: SP Racing F3 EVOHere is some fpv footage: https://www.youtube.com/watch?v=hzK-0hkHZpE

DuMOHsmol 26/02/2018

Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.

KINGKONG / LDARC 130GT 130mm z włókna węglowego FPV Racing Frame w / 5V 12V PDB dla RC Drone

US$11.11 US$14.24

4

Komentarze (2)

DuMOHsmol 26/02/2018

Works fine on Kingkong Q100 frame. However, It doesn't fit stock mounting latches on this frame, so I had to cut latches off and use the two-sided sticky pad.

Eachine 32bits F4 Brushed Flight Control Board Based On Openpilot CC3D Revolutio For Micro FPV Frame

0

Komentarze (0)

DuMOHsmol 26/02/2018

Perfect for PCB mounting in quadcopters. There is also a nice plastic box with detachable sections.

Suleve™ M3NH1 M3 Nylon Śruba Czarna nakrętka sześciokątna Nylon Zestaw asortymentowy do płytek PCB 300 sztuk

US$12.69 US$13.99

0

Komentarze (0)

DuMOHsmol 26/02/2018

I couldn't find black ones in the shops around me, but banggood has rescued me once again.

100szt. Nylonowe opaski kablowe Wrap Zapnij drut samozaciskowy

0

Komentarze (0)

DuMOHsmol 26/02/2018

It does glow in the dark, but it's dim and fades quickly! I've expected something a little bit longer and brighter.

Dancingnail Halloween Fluorescent Neon Pure Candy Color Luminous Nail Polish Nietoksyczny blask w ciemności

0

Komentarze (0)

DuMOHsmol 26/02/2018

OK-ish syringes with extremely useful tips. I use these for soldering flux dispensing.

20CC-30CC Strzykawka SMT SMD PCB Pasta lutownicza Klej Klej Dozownik cieczy

US$9.23 US$9.99

0

Komentarze (0)

DuMOHsmol 26/02/2018

Bought this to make an upgrade for my EV800 goggles. Works fine!

Eachine ProDVR Pro DVR Video Audio Mini Recorder dla FPV Multicopters do RC Drone FPV Racing

US$16.05 US$21.11

0

Komentarze (0)

DuMOHsmol 26/02/2018

But be careful with the landing legs! Not every frame will fit these. Kingkong 130GT doesn't, so I've had to cut the landing gear off.

4 szt. KINGKONG / LDARC Uniwersalna osłona zabezpieczająca silnik z podwoziem dla silników serii 11 RC Drone

US$3.11 US$3.73

0

Komentarze (0)

DuMOHsmol 26/02/2018

At first I was really skeptical about these rubber standoffs, but they do work indeed! Once I've mounted my FC on these, the gyroscope has finally stopped from getting mad on Z-axis. I only wish there were some cheaper bulk offers, I would rather buy more of these in one time!

4 szt Realacc M3 * 7 + 4.5 stabilizator lotu anty-wibracji naprawiono śruby dla RC Drone FPV wyścigi

US$9.23 US$9.99

0

Komentarze (0)

DuMOHsmol 26/02/2018

None of the reviews does mention the weight, so here it this. This PDB turned out to be a little heavy for my 130mm build, so I haven't used it yet. The soldering quality seems to be fine.

Lantian PDB Płyta rozdzielcza z wyjściem 5V 12V 3A BEC dla CC3C Naze32 Ulepszona wersja dla RC Drone FPV Racing

US$11.54 US$11.99

0

Komentarze (0)

DuMOHsmol 26/02/2018

Well, after replacing one broken motor, I found that these motors are quite fine! I still can't decide whether it was broken from the factory, or it was my fault, so I can't comment anything on the quality here. These motors seem to play fine with 3035x3 propellers and 3S battery, getting only slightly warm (but I haven't tested on full throttle yet, though). They also provide enough punch on 2S to make flying fun. Some people say that the shaft of these motors may back out, so I suggest drilling out the center hole on your propellers (a 1.6mm drill works perfectly). This way you won't apply force to the shaft when putting your props on and off.

Realacc Orange85 FPV Racer Część zamienna 1106 6000KV 1-3S Silnik bezszczotkowy do RC Drone FPV Racing

US$8.99 US$9.64

1

Komentarze (1)

DuMOHsmol 26/02/2018

The protectors are fine, but I wish there were no holes on the sides, as they clearly decrease the mud protection!

4 SZT. czarny pokrowiec na silnik uniwersalny KINGKONG/LDARC do silników serii 11 dla dronów RC

US$8.07 US$8.99

0

Komentarze (0)