Wszystkie wiadomości

Q: What’s the supported belt width?

zapytał MichelReij na 2019-09-04 03:49:36

petsch61 supported belt width? and 3D printers are from the product

2022-01-15 07:45:54 Pomocny (0)
Zatwierdź
odpowiedzi (2)

gcovey LD-1501MG Metal Gear Servo for RC Robot Mechanical Arms Features: - All metal gears - Large torque 17kg - Precise Control: 180°Rotation angle - 360°Rotation angle when it is powered off - Fast response speed with less noise - Just send signal once to lock the angle of our servo Specifications: - Speed: 0.16sec per 60°@7.4V - Stall Torques: 13kg per cm@6V; 15kg per cm@6.5V; 17kg per cm@7V. - Working Voltage: 6-7.4V - Rated Voltage: 6V - No-Load Current: 100mA - Cable Length: 30cm - Size: 40 x 20 x 40.5mm - Weight: 60g Package Included: - 1 x LD-1501MG 180°Metal Gear Servo - 1 x Set of Fixing Accessories

2020-01-24 10:10:20 Pomocny (0)
Zatwierdź
odpowiedzi (2)

MichelReij One addition: in use their resistance seems to go to around 1 Ohm, resulting in a power draw roughly equal in Ampere to the voltage. So when you feed 3 Volt, the current will be around 3 Ampere. And at 4 Volt, it’s 4 Ampere. When using a mixture of about 80 percent vegetable glycerin (VG) and 20 percent Propylene Glycol (PG), it will start producing smoke at around 2,8 Volt, and thick smoke at 3.5 to 4 Volt.

MichelReij 07/12/2019
1
Komentarze (1)

Q: What is the voltage?

zapytał Scooby na 2019-12-14 07:57:14

MichelReij Optimal voltage is around 4V, like between 3.5 and 4.2V. So you can power it with a LiPo.

2019-12-14 12:22:51 Pomocny (1)
Zatwierdź
odpowiedzi (2)

Q: Is the pulley wide enough for a 6mm belt width?

zapytał MichelReij na 2019-09-07 01:50:40

Myoxine 6mm may suit. It is used for 2020 V-slot aluminum profile.

2019-10-06 08:34:14 Pomocny (0)
Zatwierdź
odpowiedzi (1)