Banggood Dear Customer, Thank you for choosing Banggood and sorry for your any inconvenience with the product. There is an instruction about how to use the product on the product page, you could kindly check for it. If you have any suggestions or require our assistance, please do not hesitate to contact us via these links: Personal Computer: http://www.banggood.com/Contact-Us_hi111Mobile: https://m.banggood.com/contact_us.html. We are glad to help you to solve the problem and give you a proper solution as soon as possible. Thanks for your kindly understanding. Best regards, Banggood Team

Zatwierdź

BG151918544 Yes, you use a blow dryer to heat the guide tube to the required shape. It is also preferable to increase the radius on the plywood at the bottom of the fin. If you do this works fine. Note also that 5G servos are a better fit, not 9G. It can be a challenge to build if you haven’t built a balsa plane before but if you succeed you will learn a lot. The motor also needs to be smaller, like 18 or 19mm. It has a few errors in it but all can be easily rectified.

Zatwierdź

Hobbyboy either heat the casing are the wire, or nuy some Ez-rod from Du-bro. Now that pushrod and guide tube flexes easy enough

Zatwierdź