Moduł zasilania o wysokim napięciu DC 12V 24V do 85-235V do lampy Nixie Glow Tube Magic Eye
Część recenzji została przetłumaczona automatycznie.
Świetne narzędzie dla nixie i rurek.
high voltage inverter. there are some dirty soldering on the back due to the fluxant residue, but the solder of the SMD components are good. The small trimmer gives the opportunity to modify the output voltage. be carefull because high voltages are dangerous and can kill you. a little bit pricey, but satisfied. inverter ad alta tensione. ci sono alcune saldature sporche sul retro a causa dei residui di flussante, ma la saldatura dei componenti SMD è buona. Il piccolo trimmer offre la possibilità di modificare la tensione di uscita. stai attento perché le alte tensioni sono pericolose e possono ucciderti. un po 'caro, ma soddisfatto.
Works perfectly with my last Nixie project. I have to plug the command pin to ground in order to activate it. Overall a very good product. And I got some more Nixie to use :-)
Nice module of boost convertor. You can set the voltage. I desoldered the cable connectors and soldered the leads directly on board. All good.
Initially without the shdn tied to ground the output was 12V so had to figure that out, but since works perfectly. Looking forward to continue with the project.
Bardzo łatwy w użyciu i niezawodny DC do DC Bucks. Dostarczone z wyprzedzeniem przed planowaną datą.
Dostarczone przed terminem (chociaż harmonogram był dość długi) i jak w reklamie.
Pierwsza rzecz, którą dostałem, nie zadziałała. Banggood wysłał nowy, po tym jak dostarczyłem jakieś dokumenty. Nowy działa świetnie.
Dobrze, działa zgodnie z oczekiwaniami.
Dobra jakość!