Wszystkie wiadomości

jannek Without going out to check in my workshop (my legs aren't working today), the bolt is a direct replacement for the one on my Chinese 7" X 14" mini lathe. It's the same one that can be bought form a variety of sources in many countries, but rebadged.

2020-10-20 10:38:01 Pomocny (0)
Zatwierdź
odpowiedzi (3)

Q: does it need a pedal?

zapytał NOEL na 2020-09-23 09:32:52

jannek A pedal could be a nice add on, but one isn't essential to using the device. Both the plasma torch and the TIG torch have a thumb switch on the handle. The stick holder doesn't require one, of course.

2020-09-24 06:20:31 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Q: How to plug it in

zapytał BG244391521 na 2020-07-27 03:26:41

jannek The mains plug may not match your wall plug and should be changed for one that does if this is the case. On the output end, the 'ground' lead goes to the piece being worked on, with the actual tool connected to the other socket. The small connector is connected to the torch head and activates the power feed and the argon or air flow respectively. All this should be explained in the minimal instructions (with pictures) that came with the machine.

2020-07-28 03:07:48 Pomocny (1)
Zatwierdź
odpowiedzi (2)

Q: Does in come in a U.S. version 115 volts

zapytał stevepl619 na 2020-05-21 02:43:31

jannek It does. I don't know if it's dual voltage or if they send the relevant one to match a country's standard voltage.

2020-05-21 03:58:04 Pomocny (0)
Zatwierdź
odpowiedzi (1)

jannek With the correct collets and collet holders or gas lenses it can use tungstens (electrodes) from 1.0mm to 2.4mm. Banggood sells a variety of them as well as cups in both ceramic and Pyrex (clear). What spares are included with the machine appears to change over time, but a few usually still come with it. The torch head appears to be comparable to a standard WP17 size and standard consumables should fit. I can't be more precise about the tig torch as the one I got is faulty and is in the process of being replaced. To date I have only tested the stick (arc) welding function and the plasma cutter. Both work excellently!

2020-05-12 05:35:18 Pomocny (0)
Zatwierdź
odpowiedzi (1)