Najlepsze oferty na Ekstruder,Generator sygnału - Banggood Poland Zakupy online

WOLFRAM_PERREY

moje treści: Wszystkie wiadomości; Opinie; Komentarze; odpowiedzi; pytania

Wszystkie wiadomości

WOLFRAM_PERREY 30/03/2021

Workes perfect!! Very good build quality

Ulepszenie Dual Drive Bowden Ekstruder do drukarki 3D DDB Ekstruder Clone dla filamentu o średnicy 1,75 mm, Części do drukarki 3D

US$20.78 US$21.99

0

Komentarze (0)

WOLFRAM_PERREY 22/07/2018

Very affordable function generator with grate performance Looking to the specs and its performance it’s a real grate function generator. Menus Operation design is done similar to Keysight equipment. A grate feature is the included frequency counter. May be You should think about some little inexpensive mods to use this generator for radio applications: 1 - Put the floating output ground to protection earth. if You want to stay with a floating output ground you must replace the Switch PSU to a transformer based PSU with linear regulator. - Cost: US$ 1 – 20 2 - Calibrate the output levels (Tune the internal amplitude and offset pots) - Cost US$ 0 3 - Replace the original reference oscillator with a adjustable TCXO type (and calibrate after) - 10 - 20 US$ 4 - If You want to use the generator with external attenuation >40db (for radio testing) then You should shield the inside of the generator for undesired HF leaking. It comes with a plastic case and there is no shielding at all!! You can do it by spraying the inside of the housing with shielding spray and/or application of copper foil. US$ 10 After this mods You have a quite decent function generator and counter! with a lot of functionality but for very little money!! Defiantly I'm very happy with this purchase and would buy this FG again.

FY6600 cyfrowy 30MHz 60MHz podwójny kanał DDS funkcja arbitralny miernik częstotliwości sygnału generatora sygnału

US$127.99 US$135.99

0

Komentarze (1)

WOLFRAM_PERREY 30/01/2018

Very good fixture! No plastic and metal with heavy base on rubber standoffs for good standing. Nice adjustable fixture noses with adjustable spring load. The best fixture around Chinese offers.

Uchwyt do płytek PCB ze stali nierdzewnej Kaisi Jig do naprawy telefonu komórkowego i naprawy płyt głównych

US$16.16 US$16.99

0

Komentarze (0)

WOLFRAM_PERREY In compare, You would say its superior, equal or inferior than the WELLER product?

Penoff 15/05/2016

I have used Weller tip activator which is really good and I was surprised this one although different type is still very effective even at that low price. Definitely a good investment.

Najlepsze końcówki lutownicze BST-5G wskrzeszone kremem

US$11.42 US$13.99

1

Komentarze (1)