Dostawa do United Kingdom , USD

odpowiedzi

tfuse Your answer is a joke... I still do not know what FIRMWARE target to flash onto this board in Betaflight. Troll on

2017-12-30 09:37:46 Pomocny (0)
Zatwierdź
odpowiedzi (10)

tfuse SOLVED! The cable is extremely loose and I did not have it seated in the plug all the way. I will most likely have to glue it into place. All is good!

2017-12-29 01:05:58 Pomocny (0)
Zatwierdź
odpowiedzi (2)

tfuse you can wire 5v either where you've mentioned or via the plug terminal underneath the board near the SD card reader. this allows you to make a super clean build with an ESC that has a plug terminal as... Zobacz więcej

2017-12-28 14:21:34 Pomocny (0)
Zatwierdź
odpowiedzi (1)

tfuse It's powered from a 5v input. The input is either on the bottom of the board (as oriented in the 1st photo) or powered on the underside board with the supplied cable. This board can be used for either... Zobacz więcej

2017-11-26 21:27:05 Pomocny (0)
Zatwierdź
odpowiedzi (1)
Badanie zadowolenia

Pobierz aplikację, aby uzyskać ekskluzywny kupon <b> 10% zniżki </b>