Część recenzji została przetłumaczona automatycznie.
Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.
nice epp lots of carbon, only thing where is the COG?
Bardzo łatwe skrzydło w montażu bardzo stabilne, jeśli użycie baterii 550 i 850 nie musi szukać CG i bateria, którą używam much bardzo dużo było z tej baterii 550 i 850, Tylko uważaj, aby nie latać tam, gdzie wiatr może wibrować lub płomyk, tou zadowolony
Doskonały samolot dla początkującego. Budowa trwała 10 minut. Wydaje się dość wytrzymały. Użyłem mikro esc, 12a esc, 2280kv Racestar, 3 ostrza 4 calowe śmigła, 800mah 2s i leci szybko i wolno. Ale trochę za mało mocy. Przycięte skrzydło z nożem, by zmniejszyć przeciąg. Trzeba pomalować jedną stronę, aby pomóc w zorientowaniu
Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.
Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.
Wolny pilot, idealny park, bardzo solidny!
Dobre pakowanie. Prosty zestaw, ale w porządku
https://www.youtube.com/watch?v=edviFjZatoE
To jest dla początkujących przyjazny z lekką wagą