Dostawa do United Kingdom , USD
Najlepsza pozytywna recenzja dla %s na Banggood, Kupuj najlepiej %s w najniższej cenie na Banggood. Przed zakupem przejrzyj najbardziej pomocne pozytywne recenzje dotyczące %s., zabawki rc, sport rozrywkowy, moda, popularna elektronika
liquidblack 16/12/2020
Work just as advertised. This really need high current power supply. I have used LiPo battery which maybe a bit of overkill but welder handles it well even at 15.6V. When welding positive side of 18650 power setting 40-50 is quite good but on a negative side it need more. About 80 is fine. But that being said please check lower setting first. May be sufficient depending on your power supply, stripes thickness etc. You need to push both pens hard to avoid sparks. If it still not enough you can move pens closer but I would suggest making more welds than overheat. Don’t weld nickel stripes without anything underneath because it will most surely burn your table and blow big sparks. Added connector is for manual mode. You can attach a foot switch for example but auto mode is best in my opinion. It detects short circuit and after 1s and warning sound it welds. Check mosfet temperature from time to time. They are getting warm quickly. Also power switch may need replacement in future because of high starting current caused by a big capacitor.
8
Komentarze
Zatwierdź
Badanie zadowolenia

Pobierz aplikację, aby uzyskać ekskluzywny kupon <b> 10% zniżki </b>