Recenzje Oryginalny zestaw do samodzielnego montażu cyfrowego oscyloskopu JYETech DSO-SHELL DSO150 15001K z obudową - Banggood Polska zakupy online

:

Download the

Banggood App

Pobierz aplikację, aby uzyskać

3 dolary amerykańskie kupon zniżkowy

Wysyłka do:

Język:

Waluta:

Witaj Zaloguj Przystąpić
Zaloguj Dołącz do nas
Nowy klient? Zacznij tutaj.
0

Oryginalny zestaw do samodzielnego montażu cyfrowego oscyloskopu JYETech DSO-SHELL DSO150 15001K z obudową

US$30.59
~~US$52.11~~
Kup Teraz

Opinie klientów

4.9 z5

Zobacz wszystkie recenzje w2895

5 gwiazda
2718 (93.9%)
4 gwiazda
106 (3.7%)
3 gwiazda
37 (1.3%)
2 gwiazda
15 (0.5%)
1 gwiazda
19 (0.7%)

Napisać recenzję Uzyskaj podwójne oceny, jeśli jesteś jedną z pierwszych 3 opublikowanych recenzji!

Wszystkie recenzje(2895)
Obrazy
Wideo(14)
Wszystkie gwiazdy
- Wszystkie gwiazdy(2895)
- 5 Gwiazda(2718)
- 4 Gwiazda(106)
- 3 Gwiazda(37)
- 2 Gwiazda(15)
- 1 Gwiazda(19)

Sortuj według:

Do podglądu

Do podglądu
Najbardziej pomocny
Najnowszy

Recenzje tylko z Twojego kraju (Poland)

|

Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

norwenkelVIP2
DE
09/11/2016

Just received the DSO 150 with pre solder SMD parts. About 2 hours are needed to solder the needed parts. After doing the voltage function tests and calibration of the probe the two boards are mounted into the cover. Adding an external 9V power supply and ready to go. By the way, test voltage V4 shows up 1.5 V instead of the mentioned 1.61 V. Hope that´s ok! Just a short hint: Do not use a normal 9V battery. It will last just for a short time and you can be not sure if the DSO 150 display correct data.

Just received the DSO 150 with pre solder SMD parts. About 2 hours are needed to solder the needed parts. After doing the voltage function tests and calibration of the probe the two boards are mounted into the cover. Adding an external 9V power supply and ready to go. By the way, test voltage V4 shows up 1.5 V instead of the mentioned 1.61 V. Hope that´s ok! Just a short hint: Do not use a normal 9V battery. It will last just for a short time and you can be not sure if the DSO 150 display correct data.

Just received the DSO 150 with pre solder SMD parts. About 2 hours are needed to solder the needed parts. After doing the voltage function tests and calibration of the probe the two boards are mounted into the cover. Adding an external 9V power supply and ready to go. By the way, test voltage V4 shows up 1.5 V instead of the mentioned 1.61 V. Hope that´s ok! Just a short hint: Do not use a normal 9V battery. It will last just for a short time and you can be not sure if the DSO 150 display correct data.
42

Komentarze

Pokaż oryginał
reru48VIP4
DE
17/10/2017

I have added an USB-UART (serial) converter and have flashed an extended firmware from toshi, see http://www.jyetech.com/forum/viewtopic.php?f=19&t=1206#p4062 I have described the modification to export the waveform data and plot it in program GNUplot under Ubuntu, Mac OS and Windows, see: http://www.rudiswiki.de/wiki9/JyeTechDSO150

I have added an USB-UART (serial) converter and have flashed an extended firmware from toshi, see http://www.jyetech.com/forum/viewtopic.php?f=19&t=1206#p4062 I have described the modification to export the waveform data and plot it in program GNUplot under Ubuntu, Mac OS and Windows, see: http://www.rudiswiki.de/wiki9/JyeTechDSO150

I have added an USB-UART (serial) converter and have flashed an extended firmware from toshi, see http://www.jyetech.com/forum/viewtopic.php?f=19&t=1206#p4062 I have described the modification to export the waveform data and plot it in program GNUplot under Ubuntu, Mac OS and Windows, see: http://www.rudiswiki.de/wiki9/JyeTechDSO150
34

Komentarze

Pokaż oryginał

Show:

Całkowity 0 stron

Idź do strony

Iść

Możesz być zainteresowany

recommendation for you