Podgrzewana płytka drukująca PCB 120*120mm 12V Kit dla drukarki 3D Mendel RepRap
Część recenzji została przetłumaczona automatycznie.
It works great but there is not a lot of documentation. It draws 36W at 12V (resistance is 4 Ohms). The thermistor is 100k type. When connecting thermistor to motherboard connect GND and SIG as shown in picture. It could reach 90C in about five minutes. Distance between the screw holes is 112mm. I hope this clears things up a bit!
The item works as it should be, but you have to be careful! Before building it in, it needs a little work. The colors and the labels do not match! You have to figure out, witch cable goes-where-and-do-what. Otherwise it could easily reach my needed 65°C from a a12V 2A power supply.
Dostałem tablicę z uszkodzeniem transportowym, więc nie mogę jej użyć.
ok
good quality
for my CNC
Nice little bed but it was tough figuring out the wiring. The answers are out there on the web though
Good heater! I adjusted it for the Tronxy X1 printer with alteration of the desktop, the printing of ABS and other high-temperature plastics became excellent!
sono molto sodisfatto di quello che ho comprato e lo con siglio vivamente ancora grazie perche anche il formato e quello giusto per me
be careful with the wiring