Opinie klientów

Napisać recenzję
  • Wszystkie recenzje(135)
  • Obrazy
  • Wideo(0)
  • Wszystkie gwiazdy
    • Wszystkie gwiazdy(135)
    • 5 Gwiazda(126)
    • 4 Gwiazda(9)
    • 3 Gwiazda(0)
    • 2 Gwiazda(0)
    • 1 Gwiazda(0)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
Recenzje tylko z Twojego kraju (Poland)
|
Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

  • 01/08/2018

    I was able to get this working very quickly, but the values coming from the HX711, with no load on the bar, kept drifting very significantly. After a long troubleshooting session, I found out that the HX711 print has a major design flaw. They forgot to connect the AGND pin of the HX711 to GND, so it's just floating in the air, explaining the drifting. This can be fixed by soldering a wire between the GND pin on one connector and the E- pin on the other side. I found the exact same board on a different site with a picture of the schematics. This confirms that AGND is not connected to GND. See attached picture. It's also important to note that the print is designed to be supplied with 5V, even though the HX711 is specified to work down to 2.6V. The internal voltage regulator on the HX711 is configured with R12 and R13 to produce 4.2V across the sensor (E+ and E-). Considering the drop across the transistor, the supply voltage needs to be about 4.5V (or up to 5.5V), otherwise the regulator can't do its job. If a 3.3V supply is provided, the resistors can be changed accordingly. If you use it as is on 3.3V, be aware that the built-in regulator will not be able to do its job, so any ripple on the supply voltage will influence the measurement.

    Komentarze (3)
    Pokaż oryginał
  • uhmVIP3
    DK
    28/02/2019

    Tested on a Professional instrument, and accuracy is within +- 5%, acceptable for this price.

    Komentarze
    Pokaż oryginał
  • 04/11/2017

    It is okay and very sensitive. it may need fine tune when putting in use. There are so many things may affect its reading.

    Komentarze
    Pokaż oryginał
  • 19/10/2017

    Nifty little 20kg load cell for measuring weight / thrust.

    Komentarze
    Pokaż oryginał
  • 30/01/2021

    Otrzymał w dobrym porządku i kurier był szybki. Paczka była również dobrze zapakowana, dzięki, ale nadal trzeba przetestować

    Komentarze
    Pokaż oryginał
  • 30/08/2020

    Pakiet przybył zgodnie z opisem

    Komentarze
    Pokaż oryginał
  • 16/11/2019

    excelente para proyectos

    Komentarze
    Pokaż oryginał
  • 20/10/2017

    Nice product.

    Komentarze
    Pokaż oryginał
  • 27/10/2022

    ras

    Komentarze
    Pokaż oryginał
  • 19/05/2022

    Odebrane w dobrym stanie. Na zdjęciu wygląda na duży, ale to jest za małe.

    Komentarze
    Pokaż oryginał
Show:

    Całkowity 0 stron

    Idź do strony

    Możesz być zainteresowany

    recommendation for you
    • US$6.99
    • US$5.99
    • US$11.49
    • US$41.99
    • US$8.99
    • US$4.99
    • US$17.39
    • US$4.99
    • US$4.59
    • US$11.49
    • US$4.99
    • US$5.99
    • US$4.99
    • US$3.99
    • US$5.66
    • US$10.99
    • US$9.19
    • US$9.99