M5Stack PSRAM 2.0 FIRE IoT Kit Dual Core ESP32 16M-Flash+4M-PSRAM Płyta rozwojowa MIC/BLE MPU6050+
Część recenzji została przetłumaczona automatycznie.
First impressions with M5Stack FIRE Kit. It consist of three boards. At the top is M5Core red with ESP32 dual core MCU, SD card, TTF display, buttons, sensors, USB C port. In the middle is M5Go Base with 600mAh LiPo battery and 2x5 SK6812 RGB LEDs. At the bottom is M5Go Charger with protoboard, I2C signals and USB C charging connector. Starting 'Hello world' application was written in C++ language with Arduino IDE. Through M5stack API it writes to the TTF display using buttons to control RGB LEDs at both sides of M5Go Base board. Interface to RGB LEDs was done with the help of FastLED library.
Jest to najlepszy sposób, aby zainteresować Cię kodowaniem i łatwo nauczyć się podstaw. Jakość i rozmiar produktu jest dobry. Skarżę się tylko na to, że bateria jest wadliwa i po dniu ładowania, kiedy przecenię kabel ładowania, jednostka wyczerpie się. Jednostka, którą otrzymałam, ma FUALTY BATERY, poza tym wszystko jest super. Nie miałem doświadczenia w kodowaniu, ale po kilku dniach gry się tym nauczyłem. Przesyłka była szybka, polecana.