Opinie klientów

Napisać recenzję
  • Wszystkie recenzje(165)
  • Obrazy
  • Wideo(1)
  • Wszystkie gwiazdy
    • Wszystkie gwiazdy(165)
    • 5 Gwiazda(135)
    • 4 Gwiazda(17)
    • 3 Gwiazda(7)
    • 2 Gwiazda(4)
    • 1 Gwiazda(2)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
Recenzje tylko z Twojego kraju (Poland)
|
Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

  • 08/03/2017

    It will be a good training for soldering surface mount parts. Because there are few parts, if you are used to it, it will be easy to complete in about an hour. It seems that it has a built-in calendar until 2099, and when you set the date it displays the exact day of the week. In the time setting, you can set up to seconds. The kit sent to me had a translucent acrylic shell. Can you choose transparent or semi-transparent one?

    Komentarze (3)
    Pokaż oryginał
  • 03/04/2017

    A nice clock and easy to install. I recommend.

    Komentarze
    Pokaż oryginał
  • 01/03/2017

    love the sending and packing of the parts, finaly the chips are in the original strip cases. Tip for Banggood, use antistatic bags. chips are highly sencitive for rf magents, and so, Al are found on a airport and custums. OKE???

    Komentarze
    Pokaż oryginał
  • 31/10/2018

    BANGGOOD IS VERY GOOD SHOPPING SITE. I HAVE PURCHASE 5 TIMES IN THIS SITE. I HAVR RECEIVED PROPER MY PRODUCT. WITH FREE SHIPPING & PAID SHIPPING. IN THIS TIME I HAVE PURCHASE DITAL DOT MATRIX LED CLOCK. I HAVE ASSEMBLED SUCCESSFUL. MY CLOCK IS RUNNING SUCCESSFUL. I M VERY HAPPY FOR THIS PRODUCT. PLEASE SEE MY PRODUCT IMAGE & VEDIO. FURTHER BANGGOOD SITE IS VERY. I HAVE RECOMMEND FOR THIS SITE.

    Komentarze (1)
    Pokaż oryginał
  • 11/11/2019

    i have purchase ones against because the geekcreit diy ds3231 touch key precision high brightness is very good clock. before this purchase earlier i have 2 times purchase. first time i have failed to make the led clock. & second time i have success in one short.

    Komentarze (1)
    Pokaż oryginał
  • 19/08/2017

    Hello, I am from Amsterdam Netherlands. I have buy this clock and put it together. I must say I am not a expert on this. The soldering with a big solder was to complicated and I have used a mini solder for better result. After assemble the clock the display was not working good. A few matrix blocks are not working. The problem was the main big chip. I used to many solder on that chip. I removed so 70% of the solder with a copper Itze wick. A sort of streng of Cooper to absorb the solder from the chip. After that everything is working in fine order. Only the temperature chip is not working correctly,but all the people here has a problem with that,you can not help that. Now I have a nice transparant clock. For all the people with problems of the clock,check the main chip, don't use to much solder. A better way is to use solder flux to spread the solder better on the chip and do not use a big solder but a mini solder station. This is not my last clock,a have order two more to praxis on it. And than I can give it away for a present to family ore birthday present.

    Komentarze
    Pokaż oryginał
  • 23/03/2017

    The package came in a normal envelope with some protection. Bring some extra small pieces in case there is a problem. I am a beginner welder, and the assembly has been complicated by the size of the parts and the proximity of the welds. I've had to redo some. The result is a nice watch with customization options.

    Komentarze
    Pokaż oryginał
  • 25/11/2017

    This was my first attempt with SMC soldering, and I managed this quite eaily. Major issue was to read the resistors' references, but with a magnifier or a close up picture, it was OK. I also had to track one dry join (one colomn of the display remained off), but looking at were this led block was coming from, I fixed it. Only minor problem remaining is the buzzer, but I don't need the alarm clock feature. A bit too bright even at lowest level, and 3°C accuracy for temp, which is a bit high. Anyway, a fun product !!

    Komentarze (1)
    Pokaż oryginał
  • 28/10/2017

    watch is good but if you have any experiance about soldering you will be disappointed.parts are very small mounting is hard.

    Komentarze
    Pokaż oryginał
  • 21/11/2017

    Geekcreit DIY DS3231 Very nice clock kit Thanks for your interest Bangood

    Komentarze
    Pokaż oryginał
Show:

    Całkowity 0 stron

    Idź do strony

    Możesz być zainteresowany

    recommendation for you
    • US$23.84
    • US$14.26
    • US$125.99
    • US$9.99
    • US$7.99
    • US$52.07
    • US$11.99
    • US$32.99
    • US$19.54
    • US$8.99
    • US$14.99
    • US$22.99
    • US$15.99
    • US$12.99
    • US$4.99
    • US$8.99
    • US$15.99
    • US$23.71