Opinie klientów

4.96 z5
Napisać recenzję
  • Wszystkie recenzje(25)
  • Obrazy
  • Wideo(0)
  • All Star
    • All Star(25)
    • 5 Star(24)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
Recenzje tylko z Twojego kraju (Hungary)
  • February-14 2020 18:44:17

    Good board to use as wireless modulewith power supply integrated. Nice price!

    Komentarze
  • March-09 2020 05:11:39

    Nice development board. Can be flashed with a TTL flash device on the GND-TX-RX-5V connections. I flashed 2 devices with Tasmota firmware. GPIO5 should be assigned to Relay1 in Tasmota to control the on-board relay. GPIO16 of Tasmota controls the on-board programmable LED, this is inverted (eg use Relay2(i) to activate the programmable LED). You can also get more information on : http://www.chinalctech.com/cpzx/2/472.html (this link shows how to program the board with a Arduino sketch).

    Komentarze (4)
  • July-25 2020 07:59:43

    Ordered two: - One was missing some of the header pins; - Other has the relay standing proud of the board - barely any solder on the load current pins. Solved both problems without too much trouble, but beware of QA issues. Flashed Tasmota firmware onto them, using template LC-ESP12-1R-MV and working fine.

    Komentarze
  • April-22 2020 05:56:19

    placa con todo lo necesario: fuente de alimentación incluida, relé de salida... todo lo necesario para conectar a 230V y trabajar vía Wifi en tus proyectos IoT

    Komentarze
  • June-20 2020 07:07:05

    great boards with different power options and plenty available pins

    Komentarze
  • March-02 2020 11:22:35

    Great device for the price! Had it flashed with Tasmota using Tasmotizer and toggling the onboard relay under 10 minitues!

    Komentarze
  • February-24 2020 11:41:25

    Very good product. Pin header can be used to do lot of things like handle many other relays.

    Komentarze
  • February-19 2020 12:13:50

    La fuente incorporada es suficiente para el modulo, pero pequeña en caso de necesitar adjuntar circuitos externos a las salidas libres.

    Komentarze
  • February-13 2020 12:48:19

    Work Great, purchased (2) added an extension cord and printed a box and had two IOTs, simple

    Komentarze
  • February-08 2020 10:18:28

    Works great. The only remark is that the usb port is for power only, programming goes over the serial interface with an external ftdi adapter.

    Komentarze
Show:

    Total 0 pages

    Go to page

    Go

    Możesz być zainteresowany

    recommendation for you
    • Ft6,970
    • Ft3,333
    • Ft3,637
    • Ft3,849
    • Ft907
    • Ft664
    • Ft1,969
    • Ft3,637
    • Ft907
    • Ft1,025
    • Ft2,120
    • Ft3,333
    • Ft773
    • Ft2,120
    • Ft1,514
    • Ft3,940
    • Ft1,028
    • Ft3,030