Opinie klientów

Napisać recenzję
  • Wszystkie recenzje(627)
  • Obrazy
  • Wideo(7)
  • All Star
    • All Star(627)
    • 5 Star(557)
    • 4 Star(42)
    • 3 Star(12)
    • 2 Star(7)
    • 1 Star(9)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
Recenzje tylko z Twojego kraju (Hungary)
Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

  • 03/07/2021

    Its delivered in very good pack and fast , it is the best machine i ever got in my life

    Pokaż oryginał
  • 02/12/2020

    Szybka dostawa świetna drukarka tylko podręcznik może być lepszy

    Pokaż oryginał
  • 18/09/2017

    This my third CR10 printer. The first I bought print for now more than thousand hours and work very well. The assembly is really quick and easy and just after a quick tuning you can begin to print as many things you want. The big volume allow you to print big pieces or to print lots of pieces at the same time. I receive mine with a broken Z coupler but Banggood send me a new one. So I'm pleased about the after sale service. 3Dprint is my job for more thant 4 years now. I tried a lot of different printers, and I was really impress by the quality of this printer compared to the price. I use them in my production process everydays. Just two things I don't like : The filament hole for filament insertion is to close to the Z axis screw. There is a gap between the metal frame of the electronic box and the micro sd card slot. My micro sd card fall into the box several time and it's not really funny to open the box to retreive the micro sd card.

    Komentarze (1)
    Pokaż oryginał
  • 06/11/2017

    Ordered this after reading the many reviews about this. once arrived I opened up and set to building after finding some bent brackets and loose bolts I set about making sure everything was true and straight. tried to preheat the bed to set the levelling but the bed wouldn't heat (opened the control box to find the +&- the wrong way round on the power supply) now working I found the glass bed wasn't flat used a mirror time and now it prints great. Great printer but needs setting up

    Pokaż oryginał
  • 04/07/2017

    Great 3D printer. I can't compare this to other printers because this is my first one. The printer comes 90% assembled as in description 10% remaining assembly is really easy, even a child can do that. Packaging was really good I did not encounter any issues. I removed the orange stripes because I like the full black metal look of the printer. Shipment was really fast, also banggood team was really helpful they did everything that I asked them flawlessly. The printer is currently printing and from what I see printing quality is really good, it matches all the videos I have seen on youtube. !!Some important notes: If you are buying this you probably saw some youtube videos of this printer. From what I understand after those youtube videos, creality added few more items to the kit. First of all my printer came with micro sd card reader, in those videos only sd card is present. My printer also came with 2 nozzles instead of 1 (1 of them is 0.3 nozzle). SD card includes all the necessary information you need it also includes a bed strain relief .gcode which is necessary for this printer. Leveling the bed took me like 10 minutes I have seen some people complaining this takes too long.

    Pokaż oryginał
  • 03/12/2019

    The printer totally fulfilled my expectations. The quality of the printed parts are pretty impressive even though I exposed the PLA to moisture for a long time. Besides that, I got it in two weeks (way earlier than I expected) and it was very well packaged with sturdy foam. The assembly was for the most part super easy and it is also gratifying to know that there's such a big community in Internet (specially in FB) which you can rely on when in doubt.

    Pokaż oryginał
  • 15/06/2018

    Premetto che è la mia prima stampante 3d , ma è veramente uno spettacolo , intuitiva , facile da usare anche per un neofita , stampa che è una meraviglia , vale tutto quello che costa , veramente ben spesi poi con i vari upgrade acquistabili anche un po alla volta diventa uguale alla cr -10s. FANTASTICA

    Komentarze (1)
    Pokaż oryginał
  • 01/08/2017

    This 3d printer rocks! Not only is the build size phenomenal but its easy to assemble and setup and you will be printing withing an hour of opening the box! The community on Facebook is huge, helpful and exciting - check it out. I've printed some mods for it, installed LED lighting and changed the glass for an IKEA mirror and use a stick of glue for the print adhesion. And and and shipping to AU was like a week! You wont regret this purchase!

    Pokaż oryginał
  • 28/07/2017

    Received my shipment yesterday afternoon. About 7 calendar days. This is my first 3D printer ever and I took my time building it. There wasn't much to install but there were some issues like the z-axis limit switch's metal flap was bent, I had to bend it backwards but a replacement switch was given in the spare parts baggie. When I was screwing the frame together, the holes weren't cleaned out after the drilling so I had to remove a strip of metal filing. I used grease and it made it easier to screw the bolts. X-axis belt was bit of a pain because it was touching the metal beam and making a noise so I think I spent more time on that than anything else. There wasn't any other issues so I continued with the build. Here are some photos of the cat.gcode and the strain relief bracket. I must admit that I did not expect such an amazing quality out of the printer. Also, this is my first time using Banggod and their online chat customer service is great. Other than the minor issues listed above, all of the parts came with the shipment. I'm a very happy customer.

    Pokaż oryginał
  • 26/07/2017

    Had this printer for a little under a week, and I have already managed to print out some high quality products with very little clean up at the end. I have attached some of my prints, finished and all so you can see the detail. Please note, some prints I have done at a 0.3mm layer height therefore are low quality....but still look good to me.

    Pokaż oryginał

    Całkowity 0 stron

    Idź do strony

    Możesz być zainteresowany

    recommendation for you
    • Ft61 642
    • Ft5 674
    • Ft5 082
    • Ft6 601
    • Ft2 588
    • Ft13 520
    • Ft5 155
    • Ft4 412
    • Ft7 029
    • Ft2 912
    • Ft81 456
    • Ft1 450
    • Ft1 189
    • Ft84 601
    • Ft62 586
    • Ft720
    • Ft8 488
    • Ft5 082