6-12V CNC Metal Robot RC Tank Tracked Chassis Suspension Przełaj Przeszkoda Pediatric z 4 Silnikami
Część recenzji została przetłumaczona automatycznie.
This chassis comes as a box stuffed with a couple of bags of assorted parts. After carefully checking everything against the pictures I confirmed that everything was there and there and were even a few extra fasteners. After searching around on the internet I was able to find some basic pictorial assembly instructions and began putting it together. Assembly was fairly straight forward but you MUST be reasonably mechanically inclined and take your time to get everything lined up correctly. I am building this tank as an RC only FPV rig that will have a pan/tilt camera platform for FPV and HD recording cameras. I will update with pictures and video.
Montaż jest bardzo prosty i niezbędne klucze Allen zostały włączone do pakietu. Śruby zostały dostarczone w dwóch torbach, więc musiałem je posortować przed rozpoczęciem montażu. W sumie zajęło mi to 2 - 2,5 godziny, aby go złożyć (sortowanie wliczone). Link do instrukcji na polu nie działa, ale jeśli wygooglujesz SN1300 RC, znajdziesz mnóstwo filmów i przewodników. (https://www.youtube.com/watch?v=Zpkuj08v-KE) Wygląda na to, że części aluminiowe nie mają wykończenia, musiałem usunąć trochę opiłków metalu z maszyny CNC i krawędzie są dość ostre (nie nadają się dla małych dzieci). Jedna skrzynia biegów się zacięła, więc musiałem ją otworzyć. Po prostu otwarcie obudowy i umieszczenie jej z powrotem, naprawiło mój problem. Podwozie jest solidne i posiada wiele punktów mocowania. Ponadto pakiet zawiera dodatkowe śruby i przekładnie. Jestem bardzo zadowolony z tego zakupu i polecam go.
Followed the picture-by-picture build process in the link provided (sticker on the box); the build was easy enough to complete within a few hours. Be sure to align the driving wheel panels when building the driving wheels (and test them inside a piece of track if you're unsure!). There's a fair bit of slack on the tracks, but not enough to slip off, so that should offer some relief on rough terrain. A good size and weight, and the suspension is simple but effective. Note; there's some sharp edges on the panels; I'd recommend sanding the edges a bit, or wearing gloves during assembly. Or just be more careful than I was (about four cuts 🙈). A more detailed (English) manual would be nice, but got it together without it.
Awesome kit, came with plenty of spare nuts and bolts.
The robot is poorly documented but it otherwise it seems of reasonable quality. The motors are very powerful.
Dziękuję, jestem tutaj.Instaluję
Rozkaz przyjęty.
excelente
Had a really fun time building this. It looks really great too!
produit de très bonne qualité, mais la notice d'assemblage n'est pas très claie. Je l'utilise avec Arduino. reçu très rapidement