Llego en perfecto estado y completo

Llego en perfecto estado y completo

Llego en perfecto estado y completo

ok

ok

ok

ok

ok

ok

THIS IS A COPY OF A REVIEW DONE BY "mantis" This Bluetooth module is manufactured by wavesen in China. You can download a copy of their Chinese or English documentation here: http://www.wavesen.com/download.asp The latest JY-MCU V1.02pro (HC-06) version of firmware is LinvorV1.8, which can be configured into either Master or Slave mode. (Older version can't!) AT+VERSION LinvorV1.8 Read the Chinese version of HC-06 documentation, which is different from most of the English versions online. The commands have a slightly different syntax: AT+ROLE=M (for master mode) AT+ROLE=S (for slave mode) The Master and Slave must use the same PIN number. The default is 1234. If you change the PIN numbers, you must discharge the radios for 30 seconds for the new PIN number to take effect. Configure correctly; this radio works perfectly! The Master will pair with the first Slave with the same PIN number. Once paired, the Master remembers the Slave and will pair automatically. HC-06 is simpler to use and configure than HC-05. THANKS " mantis "

THIS IS A COPY OF A REVIEW DONE BY "mantis" This Bluetooth module is manufactured by wavesen in China. You can download a copy of their Chinese or English documentation here: http://www.wavesen.com/download.asp The latest JY-MCU V1.02pro (HC-06) version of firmware is LinvorV1.8, which can be configured into either Master or Slave mode. (Older version can't!) AT+VERSION LinvorV1.8 Read the Chinese version of HC-06 documentation, which is different from most of the English versions online. The commands have a slightly different syntax: AT+ROLE=M (for master mode) AT+ROLE=S (for slave mode) The Master and Slave must use the same PIN number. The default is 1234. If you change the PIN numbers, you must discharge the radios for 30 seconds for the new PIN number to take effect. Configure correctly; this radio works perfectly! The Master will pair with the first Slave with the same PIN number. Once paired, the Master remembers the Slave and will pair automatically. HC-06 is simpler to use and configure than HC-05. THANKS " mantis "

THIS IS A COPY OF A REVIEW DONE BY "mantis" This Bluetooth module is manufactured by wavesen in China. You can download a copy of their Chinese or English documentation here: http://www.wavesen.com/download.asp The latest JY-MCU V1.02pro (HC-06) version of firmware is LinvorV1.8, which can be configured into either Master or Slave mode. (Older version can't!) AT+VERSION LinvorV1.8 Read the Chinese version of HC-06 documentation, which is different from most of the English versions online. The commands have a slightly different syntax: AT+ROLE=M (for master mode) AT+ROLE=S (for slave mode) The Master and Slave must use the same PIN number. The default is 1234. If you change the PIN numbers, you must discharge the radios for 30 seconds for the new PIN number to take effect. Configure correctly; this radio works perfectly! The Master will pair with the first Slave with the same PIN number. Once paired, the Master remembers the Slave and will pair automatically. HC-06 is simpler to use and configure than HC-05. THANKS " mantis "

Wszystko świetnie, działa bez problemów. Jak zawsze bardzo zadowolony

Alles super. Funktioniert ohne Probleme. Wie immer sehr zufrieden

Wszystko świetnie, działa bez problemów. Jak zawsze bardzo zadowolony

Dobra, zgadza się

OK. korrekt

Dobra, zgadza się

Prace zgodnie z oczekiwaniami

Works as expected

Prace zgodnie z oczekiwaniami

Wydaje się być w porządku

seems to be all ok

Wydaje się być w porządku

Dobry produkt jak zawsze.

Good product like always.

Dobry produkt jak zawsze.

Dziękuję, doskonale!

thank you, perfect!

Dziękuję, doskonale!