Dostawa do United Kingdom , USD
Najlepsza pozytywna recenzja dla %s na Banggood, Kupuj najlepiej %s w najniższej cenie na Banggood. Przed zakupem przejrzyj najbardziej pomocne pozytywne recenzje dotyczące %s., zabawki rc, sport rozrywkowy, moda, popularna elektronika
BG104844016 30/01/2018
The encoder is OK, but the switch is NOT brought out to any pins, which means soldering, no matter what you do. Since the 'C' pin is directly connected to the GND pin, you can cut the trace on the back between the two pins, and wire one side of the switch to the old GND pin, and then wire the other side of the switch to either 'C' (the new GND pin) or to VCC. Normally you'll want the switch to GND as most micros have internal pull-up resistors, and it's less to wire in later. I've added a schematic of the debounce filtering on the photos below for your convenience. If you still have too much bounce, you might want to add up to .1uF caps on top of the existing 22nF capacitors. You may not need it. Since the description doesn't mention it, the encoder has 20 detents / positions per 360 revolution. I can't do a PREVIEW, so hopefully the photo comes through readable.
5
Komentarze (1)
Zatwierdź
  • Banggood Dear customer, Thank you for choosing Banggood and sorry for your any inconvenience came up with the product. If anything about the items quality problem, wrong description, product connection and poor package or other questions, you can contact us via this link:http://www.banggood.com/Contact-Us_hi111, and we will give you a good solution. Best regards :) Banggood team  

    23/05/2024
Badanie zadowolenia

Pobierz aplikację, aby uzyskać ekskluzywny kupon <b> 10% zniżki </b>