Opinie klientów

4.77 z5
Napisać recenzję
  • Wszystkie recenzje(84)
  • Obrazy
  • Wideo(0)
  • All Star
    • All Star(84)
    • 5 Star(70)
    • 4 Star(11)
    • 3 Star(2)
    • 2 Star(0)
    • 1 Star(1)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
  • October-23 2018 23:30:04

    The package was well protected at the factory. But, when I opened it carefully, I found that one z-axis slide rod was missing as shown circled on the first picture. Informed Banggood customer service of this missing item. After a few emails back and forth with Banggood customer service, they were able to resolve the issue by sending me a replacement z-axis slide rod. I have since received the replacement slide rod (see picture 2) and have quickly completed the assembly of the machine (see picture

    Komentarze
  • September-10 2018 18:17:04

    I’m an engineer that works projecting and assembly prototypes and consider myself a person with experience assembling machines and some knowledge in electronics hardware and software. it took me 6h to assembly it all and 2h to calibrate it properly. the result surprised me its a nice machine especially for this price! some 3D printed parts turns it difficult to assembly one came bent the one with linear bearings seems to have the holes where you mount the bearings misaligned and the screwed shaft

    Komentarze
  • May-17 2018 15:57:29

    product Quality is Perfect but the main problem is about the software need to find some good software ... i have use led strip lights under the driller looks amazing i can see my work area so clear 😃

    Komentarze
  • April-06 2019 06:33:19

    All packed fine. Motors have scratches at back side. Looks like be in used. Mators:D42HSC1413B-24. Power adapter light weight. Cable of power adapter, looks cheap. Conners for main frame some kind of metal. Controller board from back not clean. Has remnants flux

    Komentarze
  • STPL
    IN
    September-17 2019 00:33:51

    Good quality, easy to assemble mechanical parts, Screw driver should be provided along with the machine. Guide should be in proper English and updated, We have used our expert fitter to assemble it Configuration of machine was not correct, axis movement inverted. Hard Board should be provided free of cost along with all machine Better quality of drill bits should be supplied, Overall it is value for money

    Komentarze
  • March-30 2019 03:38:40

    It's nice, but only 2 cutting tool is provided and the product dimension are not accurate.

    Komentarze
  • October-15 2018 17:20:24

    Estoy feliz de recibir este articulo que compre en Banggood, mi lugar favorito de compras en lineas

    Komentarze
  • February-13 2020 15:44:26

    Take some time to assemble. Some parts need minor rework. But finaly you get a working CNC machine.

    Komentarze
  • February-14 2018 03:41:33

    Two half day is needed to build the machine. I met problem with a smaller ball bearing (on Z axis) which loses its balls ... Control board is different from description (MKS DLC V1.0) with last GRBLversion ( V1.1) but seems better. GRBL parameters to use for $100 to $102 are 780 and for $6 is 5. I tried different milling setup: my best setup for PCB is : zwork=-0.1 mm / milling speed = 20000 rpm / milling feed is 120 mm/min

    Komentarze (2)
  • January-04 2018 06:24:17

    The assembly of the machine was relatively easy. But I also consider IKEA furiture easy to build :-). I havent used the T-nuts provided in the package but used bigger ones instead, see https://www.banggood.com/50pcs-M5-T-Sliding-Nut-Zin-Plated-Carbon-Steel-T-Sliding-Nut-for-2020-Aluminum-Profile-p-1048439.html The Z-axix comes out of a 3D-printer, which is surprisingly sturdy. However, the little spax are very brittle, I turned the head of two of them, the holes seem to be too tight so the thread

    Komentarze (3)
Show:

    Go to page

    Go

    Możesz być zainteresowany

    recommendation for you
    • Ft58,163
    • Ft58,471
    • Ft66,248
    • Ft30,773
    • Ft15,693
    • Ft5,537
    • Ft46,274
    • Ft43,083
    • Ft24,310
    • Ft93,177
    • Ft18,462
    • Ft1,228
    • Ft2,767
    • Ft966
    • Ft146,440
    • Ft1,843
    • Ft32,312
    • Ft920